Source
Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree
The hybrid-pi model is the low-frequency small-signal model of a BJT in the forward-active region. Its parameters depend only on the Q-point, not on the device geometry.
Model and Parameters

| Parameter | Formula | Meaning |
|---|---|---|
| Transconductance | output current per input voltage, mV | |
| Input resistance | resistance seen looking into the base | |
| Output resistance | Early effect, large |
Equivalent Forms
The voltage-controlled source can be rewritten as a current-controlled source:
So holds for both DC and AC analysis in the forward-active region.

pnp Transistor
The small-signal model of a pnp is identical to the npn model. The reversed current directions are already taken care of by the polarity of , so no sign changes are needed in AC analysis.
Quick Example
µA, , V, V:
- mS
- kΩ
- kΩ
The model is only valid while stays small, see Small-Signal Input Range.