Source
Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree
For a diode in series with across , the operating point (, ) must satisfy two equations at once.
Equations:
- diode:
- load line from KVL:
Graphical Analysis
Plot both on the - plane. The straight line through and with slope is the DC load line. Its crossing with the diode curve is the Q-point (quiescent point).

Iteration Method
Alternate between the two equations until the numbers stop changing. Start with a guess of V.
Example: 12 V source, kΩ divider, diode across , nA, , mV.
Step 1, Thevenin equivalent seen by the diode:
Step 2, iterate with and :
| Pass | (V) | (mA) |
|---|---|---|
| 1 | 0.700 | 1.060 |
| 2 | 0.602 | 1.080 |
| 3 | 0.603 | 1.079 |
| 4 | 0.603 | 1.079 |
Q-point: mA, V.
Converges fast because changes only slightly when changes. Once the Q-point is known, small signals around it can be handled with the Diode Small-Signal Resistance.