Source
Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree
A finite bandwidth means the output of an amplifier cannot jump instantly when a pulse arrives. The rise time is the time for the output to go from 10 % to 90 % of its final value.
Derivation With an RC Circuit
A first-order RC low-pass charging from 0 V towards :
Solve for the 10 % and 90 % points:
- at
- at
- so
The dB bandwidth of the same circuit is . Multiply the two:

Tracking a Pulse
For the output to follow a pulse edge within a time , two limits must both be met:
The first is the large-signal slew rate limit, the second is the small-signal bandwidth limit.
Quick Example
An amplifier with kHz has µs, so edges faster than a few µs will be rounded off.