Source

Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree

A balanced Y-Y system has a balanced Y-connected source and a balanced Y-connected load. The total impedance per phase is (source, line and load impedance), usually just .

Line and Phase Voltages

The line voltages are between lines, for example . With an abc sequence:

Line and Phase Voltage Phasors

So for a Y connection:

  • the line voltages lead the corresponding phase voltages by
  • the line voltages are also balanced and sum to zero

Line Currents

KCL on each phase gives

In a Y connection the line current equals the phase current. Since the currents are balanced,

The neutral carries no current and has no voltage across it, so it can be removed (three-wire system) without changing anything.

Per-Phase Analysis

Because the system is balanced, only one phase needs to be solved. Connect across between n and N, find , then get the other phases by shifting by . This works even when the neutral wire is absent.

Worked Example

A balanced abc Y source with V rms feeds a Y load of per phase through lines of :

  • A
  • A and A
  • line voltage at the source V

Loads connected in delta are covered in Delta Connected Three-Phase Systems.