Source

Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree

The impedance parameters ( parameters) write the port voltages in terms of the port currents:

Z Parameter Summary

Finding z Parameters

They are called open-circuit impedance parameters because one port is always left open:

  • drive port 1 with current and open port 2 (): and
  • drive port 2 with current and open port 1 (): and

Names:

  • : open-circuit input impedance
  • : open-circuit forward transfer impedance
  • : open-circuit reverse transfer impedance
  • : open-circuit output impedance

Instead of two experiments, KVL can be written directly and arranged into the form above.

Worked Example

For a T network with 3 in the port 1 arm, 4 in the port 2 arm and 2 in the shared leg:

  • port 2 open: flows through 3 and 2, so , and is the 2 voltage, so
  • port 1 open: and

For any T network, equals the shared leg. Swapping the roles of voltage and current gives the Admittance Parameters.