Source
Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree
The admittance parameters ( parameters) write the port currents in terms of the port voltages:
Y Parameter Summary

Finding y Parameters
They are called short-circuit admittance parameters because one port is always shorted:
- drive port 1 with and short port 2 (): and
- drive port 2 with and short port 1 (): and
Names: is the short-circuit input admittance, the forward transfer admittance, the reverse transfer admittance and the output admittance. The equations can be drawn as and in parallel with dependent current sources and . The parameters are used to design ladder low-pass filters.
Worked Example

Short port 2. The 2 and 4 are in parallel (4/3 ), in series with 3 :
- S
- current division: , so S
Short port 1. Now 2 3 = 6/5 , in series with 4 :
- S
- , so S
The same result comes from nodal analysis at the middle node, , then writing and in terms of . It also equals the inverse of the matrix found for the same T network. A mixed set of voltage and current variables gives the Hybrid Parameters.