Source

Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree

Three standard inputs show different sides of a transfer function : an impulse, a step and a sinusoid.

Impulse Response

The impulse response is the output when the input is with zero initial conditions. Since :

The impulse adds no poles of its own, so is purely a natural response:

Any linear circuit with constant element values is fully described in the time domain by . If the circuit is stable, .

Step Response

For a step input , :

DC Steady-State Response

If the circuit is stable, the natural part dies out, leaving the DC steady-state value

If the circuit is unstable, a steady state is never reached.

Example: with input gives .

AC Steady-State Response

For a stable circuit with input , the steady-state output is

where is the frequency response. So:

  • output frequency equals input frequency
  • output amplitude equals input amplitude times
  • output phase equals input phase plus

Worked Example

with . At :

This "multiply by a complex number" idea is the basis of phasor analysis.