Source
Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree
Ohm's law states that the voltage across a resistor is directly proportional to the current through it:
The constant is the resistance in ohms (). For a uniform conductor, , where is the resistivity, the length and the cross-sectional area.
Using Ohm's Law Correctly
The current direction and voltage polarity must follow the passive sign convention: current flows from the higher potential to the lower potential through the resistor. Between nodes a and b:
Short Circuit and Open Circuit
| Case | Resistance | Result |
|---|---|---|
| Short circuit | , current can be anything | |
| Open circuit | , voltage can be anything |
Conductance and Power
Conductance is the reciprocal of resistance, measured in siemens (S):
Power dissipated in a resistor is always positive (it only absorbs power):
Example: 30 V across 5 k gives mA, mS and mW.
Series and Parallel Resistors
Combination rules:
- series (same current):
- parallel (same voltage):
- two in parallel:
- equal resistors in parallel:
Voltage and Current Dividers
For two resistors in series across (voltage divider):
For two resistors in parallel fed by (current divider), each current uses the other resistor on top:
If (shorted), all the current bypasses through the short.
Example: to get with , solve , so .
The laws that connect many elements together are Kirchhoff's Laws.