Source
Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree
What modulation does
Modulation puts information onto a high-frequency carrier by changing its amplitude, frequency or phase. The carrier lets the signal use a small antenna and its own frequency channel.
Analog modulation
Types:
- AM (amplitude modulation): the message changes ; simple, but sensitive to noise
- FM (frequency modulation): the message changes the instantaneous frequency; better noise performance, uses more bandwidth
- PM (phase modulation): the message changes
Digital modulation
Digital schemes send symbols. Each symbol is one of states and carries bits.
| Scheme | What changes | Bits per symbol | Notes |
|---|---|---|---|
| ASK / OOK | Amplitude (on or off) | 1 | Cheap remotes and sensors |
| FSK / GFSK | Frequency | 1 or more | Bluetooth, many RC links |
| BPSK | Phase (0° or 180°) | 1 | Very robust, low SNR needed |
| QPSK | Phase (4 states) | 2 | Satellite, telemetry |
| 16-QAM | Amplitude and phase | 4 | Wi-Fi, LTE at good SNR |
| 64-QAM | Amplitude and phase | 6 | High data rate, needs high SNR |
Constellation diagram
Each symbol is a point in the I/Q plane: the in-phase part on the x-axis and the quadrature part on the y-axis. Noise spreads each received point into a cloud. When the clouds overlap, the receiver makes symbol errors.
Trade-off:
- more points (higher ): more bits per symbol, but the points are closer, so a higher SNR is needed
- fewer points: lower data rate, but robust at long range and low SNR
Many systems change the modulation automatically with the link quality (adaptive modulation).
Spread spectrum and OFDM
Methods used in modern links:
- FHSS (frequency hopping): the carrier jumps between channels in a pseudo-random order, which resists interference and jamming
- DSSS (direct sequence): each bit is spread by a fast code over a wide band
- OFDM: data is split over many narrow, orthogonal subcarriers, which handles multipath well (Wi-Fi, LTE, many digital video links)
An SDR receives and demodulates these signals as I/Q samples, see Software Defined Radio (SDR).