Source

Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree

Propagation mechanisms

A radio wave reaches the receiver along one or more paths.

Mechanisms:

  • line of sight (LOS): the direct path, the strongest when it is clear
  • reflection: the wave bounces off large flat surfaces such as the ground, buildings and water
  • diffraction: the wave bends around edges such as rooftops and hills, which works better at lower frequency
  • scattering: the wave spreads off objects that are small compared with the wavelength, such as leaves and lamp posts
  • absorption: materials such as walls, bodies and foliage turn part of the energy into heat; water absorbs strongly near 2.4 GHz

Fresnel zone

A clear straight line between two antennas is not enough. The first Fresnel zone is an ellipse around the line of sight where most of the energy travels. Keep at least 60% of it free of obstacles.

Radius at the middle of the link, with in km, in GHz and in m:

Example: a 1 km link at 2.4 GHz needs m at the midpoint, so the antennas must be well above ground level.

Multipath and fading

Multipath means copies of the same signal arrive by different paths with different delays and phases. They add at the receiver, sometimes in phase and sometimes out of phase.

Types of fading:

  • large-scale fading (shadowing): slow change in average power when a large object blocks the path
  • small-scale fading: fast, deep drops over distances of about half a wavelength, caused by multipath
  • frequency-selective fading: some frequencies in the band cancel while others do not, which happens when the delay spread is large compared with the symbol time

Ways to reduce fading:

  • antenna diversity: two or more antennas spaced apart, so one is likely to receive a good signal
  • frequency hopping or spread spectrum: the signal does not stay on one faded frequency
  • OFDM and equalisation: split a wide channel into many narrow ones, each with flat fading

Practical effects

Rules of thumb:

  • real path loss outdoors is often larger than free space, with a path loss exponent of about 2.7 to 4 in place of 2
  • a body or a wall can add 3 to 20 dB of loss
  • elevated antennas and a clear Fresnel zone give the biggest gain in range

The antennas at each end decide how much of the transmitted power goes in the right direction, see Antenna Basics.