Source

Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree

This extends Maximum Power Transfer to AC circuits. Replace the circuit by its Thevenin equivalent and , with load :

Condition

Setting and gives and , that is

The load impedance must be the complex conjugate of the Thevenin impedance. The reactances then cancel and

(using the peak value of ; with rms it is ).

Conjugate Matching Summary

Purely Resistive Load

If the load must be a pure resistor (), the best choice is

which gives less power than the conjugate match.

Worked Example

A 10 V source with 4 and branches and a series element feeding :

  • V
  • W