Source

Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree

If all independent sources are DC and have been on for a long time, every voltage and current settles to a constant value. The circuit is then in DC steady state.

Element Behaviour at DC Steady State

Since nothing changes with time:

  • capacitor: , so it acts as an open circuit
  • inductor: , so it acts as a short circuit

To find DC steady state values, redraw the circuit with every capacitor removed (open) and every inductor replaced by a wire, then solve the resistive circuit.

Continuity at Switching

When a switch opens or closes at :

Capacitor voltage and inductor current are continuous because they hold stored energy. Other quantities (capacitor current, inductor voltage, resistor values) can jump at the switching instant.

How to find values at :

  1. Find and from the DC steady state circuit before switching
  2. Carry these across the switching instant unchanged
  3. In the circuit after switching, treat the capacitor as a voltage source and the inductor as a current source , then solve for everything else

Worked Example

A 12 V source drives 2 in series with a 2 H inductor, which then feeds 4 to ground, with a 1 F capacitor across the 4 . At DC steady state:

  • the inductor is a short and the capacitor is open, so A
  • is the voltage across 4 , so V
  • J and J

These initial values are exactly what the Natural Response of First Order Circuits needs.