Source

Adapted from my own handwritten and hand-typed notes from Year 1 to Year 3 of my EEE degree

Why decibels

RF power values span a huge range, from watts at a transmitter to less than a picowatt at a receiver. The decibel (dB) is a log scale that turns this range into small numbers, and it turns multiplication into addition. Gains and losses along a radio link can then simply be added.

Definition

For a power ratio:

For a voltage ratio (same impedance):

The factor is 20 for voltage because .

Ratios to remember

Change in dBPower ratio
+3 dBabout ×2
+6 dBabout ×4
+10 dB×10
+20 dB×100
-3 dBabout ×0.5
-10 dB×0.1

Absolute power units

dB alone is a ratio. A suffix gives a reference so the value becomes an absolute quantity.

Common units:

  • dBm: power relative to 1 mW,
  • dBW: power relative to 1 W, so
  • dBi: antenna gain relative to an ideal isotropic antenna
  • dBd: antenna gain relative to a half-wave dipole,
  • dBc: power relative to the carrier, used for spurs and harmonics
PowerdBm
1 W30 dBm
100 mW20 dBm
1 mW0 dBm
1 µW-30 dBm
1 nW-60 dBm
1 pW-90 dBm

Working rules

Rules:

  • dBm + dB = dBm: adding a gain or loss to a power gives a power
  • dBm - dBm = dB: the difference of two powers is a ratio
  • never add two dBm values directly; convert to mW first, add, then convert back

Worked example

A transmitter gives 20 dBm. The cable loses 2 dB and the antenna has 6 dBi gain.

This way of adding gains and losses is the basis of a Link Budget.